ALDL CABLES DRIVERS

Next, select вЂњConfigure Plug-in ComponentвЂќ Then make sure вЂњStandard SerialвЂќ is selected and the COM port shown matches the COM port of your cable. Then make sure вЂњTunerPro Data Acquisition I/O InterfaceвЂќ is selected.

Go to Tools вЂ¦ Preferences and select вЂњUse Plug-inвЂќ for Interface type.

Load a valid XDF / ADS-ADX combination for your vehicle.

Start TunerPro RT with your cable plugged into your computer but unplugged from the vehicle.

You will need to have TunerPro RT version 5.0 or later installed. Take a look at the USB troubleshooting guide if you have any questions or concerns here. Before you continue, you should have verified USB connectivity and you will need to know which COM port your cable is using. The first step towards determining if your ALDU1 is working correctly is to look at the USB side.

Take a look at the OBD1 GM section of our online store here Test Procedure Pins 4 and 5 are connected to RJ45 pin 1.This is the late model ALDL connector used in 1995: pin E and pin M are connected to RJ45 pin 3.This is the 86-94 original ALDL connector: In the event you need to build a custom cable, use the following pin outs for the RJ45 connector: It can be interfaced with many pieces of software, including TunerPro. The ALDU1 can be purchased by itself, or as a combo with either the CABL1 or CABL2.Д¬ABL1 is used for ~88-94 GM OBD1 vehicles with a rectangular ALDL connector like this:Д¬ABL2 is used only on 95 (and some late-year 94) vehicles that still speak ALDL but have the D shaped вЂњOBD2-styleвЂќ connector like this: The ALDU1 is compatible with the CABL1 and the CABL2, which are interface cables that connect to GM OBD I and OBD II vehicle respectively. This product was added to our catalog on Wednesday 28 July, 2004.The ALDU1 is a datalogger designed to work with OBD I GM vehicles. Customers are solely responsible for ensuring all products purchased are used in a legal manner. Moates does not implicitly or explicitly confirm the legality of using any products it sells on public roads. These parts are sold for OFF ROAD, RACE-ONLY, ground-vehicle use only in a controlled environment. Moates prohibits the use of these products on emission controlled vehicles.

California (CARB) & other states prohibit the sale or use of some aftermarket parts, including those that tamper with, modify or defeat emissions systems in any 1966 and newer vehicles. OFF ROAD USE NOTICE: items sold through including tuning products may be designed for off-road/race use only, and are not applicable for vehicles in states that require pollution controlled vehicles.

ALDL CABLES DRIVERS

Support Links Troubleshooting: Switches Datalogging with an ALDU1 WinALDL Software TunerPro V5: Converting ADS to ADX format GM 94-95: Reflash or not? GM 86-95 OBD1 Guide (READ ME) USB Drivers вЂ“ FTCLEAN Troubleshooting: USB Drivers 101 USB Driver Installation ALDU1

Aldl cables